BENINCA - 230 V AC IRREVERSIBLE ELECTROMECHANICAL GEARMOTOR WITH QUICK-RELEASE OR MANUAL EMERGENCY OPERATION, FOR SECTIONAL AND ROLL-UP DOORS FOR INDUSTRIAL USE, UP TO 35 M2
- SINGLE-PHASE VERSION
- NEW PLASTIC ENCLOSURE THAT SIMPLIFIES MOTOR WIRING OPERATIONS THANKS TO THE POSITION OF THE FRONT TERMINAL BLOCK AND THE ABILITY TO ACCESS THE CABLES FROM THREE DIFFERENT POSITIONS
- FITTED WITH AN ABSOLUTE ENCODER THAT ALLOWS THE POSITION OF THE DOOR’S OPENING AND CLOSING LIMIT SWITCHES TO BE ADJUSTED DIRECTLY FROM THE CONTROL UNIT
- QUICK-CONNECT WIRING FOR EASY AND SPEEDY INSTALLATION
- TWO ACCESSORIES ARE AVAILABLE FOR THE CHAIN DRIVE WITH A GEAR RATIO OF 1:1 (OFF-AXLE MOTOR INSTALLATION) OR 1:1.8 (TORQUE OR SPEED MULTIPLIER)
- MAXIMUM SAFETY IS GUARANTEED EVEN WHEN OPERATING THE QUICK-RELEASE MECHANISM, THANKS TO A MICROSWITCH THAT CUTS OFF THE MOTOR POWER SUPPLY
- THE OIL-BATH GEARBOXES WITH HARDENED STEEL SCREWS AND BRONZE GEARING GUARANTEE HIGH PERFORMANCE, MAXIMUM RELIABILITY AND QUIET OPERATION
COMPLETE KIT FOR INDUSTRIAL AND GARAGE DOORS
KVN.M20 ESW 9592622
230VAC
IT INCLUDES:
- 1 x VN.M20ESW: Irreversible electromechanical gearmotor 230v
- 1 x THINKY: Control unit 230v
- 1 x VN.ESW 5: Cable with quick-connect terminals. L= 5 mt
TECHNICAL SPECIFICATIONS:
Mains power supply: 230 Vac (50-60Hz)
Motor power supply: 230 V AC
Maximum current absorbed: 3.3 A
Maximum torque: 130 Nm
Maximum output speed: 18 rpm
Output speed: 24 rpm
Shaft hole: 1” (25.4 mm)
Limit switch reduction ratio: 1/20
Duty cycle: 30%
Protection rating: IP40
Operating temperature: -20°C to +50°C
Lubrication: OIL
Door surface area: 35 m² (max)
